Kleiberit Polyurethane Adhesive, 501-0, 500ML, Yellowish Brown

Name: Kleiberit Polyurethane Adhesive, 501-0, 500ML, Yellowish Brown
Brand: Kleiberit
SKU: kleiberit-501-0-500ml
Price: 80.00 AED
Availability: PreOrder

SV Code: 469383129348Model No.: 501-0

500 mlYellowish BrownPolyurethaneDIN 204 D4, EN 204 D48000 cps

AED 80.00/ Piece

Price includes VAT· Sign in to see your account priceMore Details

Out of stock

Return or exchange within 30 days of delivery.Sign in to see your account price and place orders.

Key features

Temperature: +20 Deg.C ideal, not below +5 Deg.C
Wood moisture: ideal for interior between 8-10% for exterior between 10-14%
Coat weight: 100-200g/sq.m Depending on the condition of the material
Open time: 25 minutes
Press time: 60 minutes at 20 Deg.C
Final strength: after approx. 24 hours with sufficient moisture

Full description & specifications ↓

Fast delivery Genuine & warranty Bulk quotes

Specifications

SV Code	469383129348
Brand	Kleiberit
Category	Polyurethane Adhesive
Unit	Piece
Size	500 ml
Colour	Yellowish Brown
Base Material	Polyurethane
Application Method	Spatula, Hand Roller, Plastic Squeeze Bottle Special Dispensing Apparatus
Viscosity	8000 cps
Cure Time	2-3 hrs
Delivery	Not on the shelf right now; 7 working days to source and deliver.

Description

The handy bottle with the patented dispensing lid. Self cleaning and easy to dispense precise adhesive application. One component, polyurethane adhesive for very strong, gap-filling bonds with high temperature resistance and water resistance according to DIN/EN 204 stress group D4

Application:

Single-sided application using a spatula or hand roller to the surface which is least porous

Assemble the two pieces to be bonded

The product cures to a water-resistant, solvent- resistant and semi-rigid adhesive film when subjected to the influence of humidity (air, material). The cross-linking process can be accelerated by means of a targeted moisture supply (fine water spray, approximately 20g/m²), or by higher temperatures (40°C up to max. 60°C)

The cross-linking process should take place with a pressure that guarantees sufficient contact of the glued surfaces. In order to protect exposed surfaces from being contaminated with glue, apply e.g. a silicone paper to this area

The necessary pressure is dependent upon the type and size of materials. A good closed joint should be achieved. Minimum pressure for bonding laminated wood: 0.6 N/mm². The more intensive the cross linking of the adhesive under pressure, the higher the subsequent load ability