Weicon Rust Converter Spray, 11155400, 400ML

For the effective neutralisation of rust on rusty cast iron and steel surfaces. Protects from corrosion and is suitable for internal and external use. The Rust Converter is based on epoxy resin and forms a metallicorganic iron complex with the rust layer. This connection is stabilized with the special epoxy resin, which protects metals from external impacts. The forming black layer serves as base coat and is the foundation for the subsequent, permanent coating. The spray is anti-corrosive, has excellent penetrating properties and a high opacity. It is temperature resistant up to +80 Deg.C (shortterm < 15 min. to +160 Deg.C), has good weather and UV resistance as well as excellent solvent resistance. WEICON Rust converter is free from heavy metals and mineral-acid. Rust Converter can be applied at all rusty areas, e.g. at machines and plants, agricultural equipment as well as motor vehicles. The spray can also be used as a protective, preventive layer.
Surface pre-treatment

The surface has to be dry, clean and free from dust, oil and grease. Remove loose rust, grease, dirt and paint residue with the aid of a wire brush, grinding discs, etc. Remove grinding dust. Clean surface (WEICON Cleaner S).

Processing

Apply the spray one to two times from a distance of 25-30cm. Allow the spray to flash off for approx. 3 - 5 minutes in between. After drying completely (approx. two hours), the top coat can be applied. Check surface compatibility before application.

Technical Data:

Odour: Synthetic resin

Features: Rust converting, priming, sealing

Silicone free: Yes

Storage stability: 24 months

Colour: Beige, Transparent

Temperature resistance: -50 to +80 briefly (< 15 min.) to +160 Deg.C

IMPA-Code: 450820