Bostik Super Glu Liquid is a single part, fast curing adhesive which bonds in seconds without the need for heat or hardener. It is extremely economical in use and provides very strong bonds of high tensile strength. Bostik Super Glu Liquid is suitable for bonding porcelain, many rubbers, most common metals, some types of jewellery and most plastics.
Preparation:
Work on a protected surface as any spillages are very difficult to remove, particularly from sensitive surfaces like fabrics and skin
Make sure all surfaces to be bonded are close fitting, clean and dry
Ensure that the tube is held upright and pointing away from you
Application:
Unscrew the nozzle and cap and remove the safety collar. Replace the nozzle and cap and screw down to puncture the seal. Remove the cap and leave the nozzle in place
Very carefully apply a small amount of Bostik Super Glu Liquid to one surface only (typically apply one drop of adhesive for each 6cm2 of substrate to be bonded)
Bring the surfaces together and hold firmly for approximately 30 seconds. (Full strength is achieved in approximately 12 hours)
Replace the cap firmly after use, taking care not to leave Bostik Super Glu Liquid between the cap and the nozzle. Store upright. The tube is purposely only part full as the air above the adhesive stabilizes it. This air space in the tube reduces the chance of accidental spillages- High strength
- Bonds in seconds
- For home and office use
- Solids Content: 100%