Rennsteig
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Available on Request
Rennsteig
Rugged self striking mechanism activated by downward pressurePrecision designReplaceable hardened pinAdjustable striking forceMaterial: Steel, galvanized surfaceDelivered with euro slot hanger for... -
Available on Request
Rennsteig
Items Included:6x Pin Punches (3, 4, 5, 6, 8, 10mm) -
Rennsteig
AED1,868.00Items Included:RAUCUT I Tool;Spatula;Allan Key;Spare Blades;Cable Guides 1.8/2.0/2.4/2.8/3.0/3.5/4.2AED1,868.00 -
AED191.00 -
Rennsteig
AED703.00For cutting single-strand, multi-strand and fine-wire aluminium and copper cablesIdeal for cramped working spacesJointed telescope arms adjust for the ideal grip widthRatchet action and low weight...AED703.00 -
Rennsteig
AED100.00For cutting single-strand, multi-strand and fine-wire aluminium and copper cablesEasy, clean cut with one-hand operationNo crushing or deformation of cablesNot for steel wire, wire cable or...AED100.00 -
AED645.00 -
Rennsteig
AED481.00Dies and locators can be used flexibly in Crimp System Tool PEW 12, E-PEW 12 and Crimping machines CM 25-1, CM 25-5, CM 25-6Our dies can be used in KNIPEX Crimp-Systemzange 97 43 200 A and KNIPEX...AED481.00 -
Rennsteig
AED67.00Entry-level model for crimping 0.25 – 2.5 Sq. Millimeter ferrulesForged bodyMilled trapezoidal profileAED67.00 -
Rennsteig
AED386.00Special tool for notching tabs in wiring ductsUp to 80 mm cut length with a single cutCut width 24 mmClean, burr-free cut to the bottom of the ductMatrices with integrated cut section ejectorAED386.00 -
Rennsteig
AED323.00For burr-free cuts of plastic panels, baseboards and cable ductsGreat cutting performance even at the tip of the bladeForce is evenly distributed over the entire blade length because of the optimal...AED323.00 -
Rennsteig
AED12.00Affected tools comply with DIN 6450AED12.00 -
Rennsteig
AED8.00Affected tools comply with DIN 6450AED8.00 -
Rennsteig
AED10.00Affected tools comply with DIN 6450AED10.00 -
Rennsteig
AED10.00Affected tools comply with DIN 6450AED10.00 -
Rennsteig
AED8.00Affected tools comply with DIN 6450AED8.00 -
Rennsteig
AED6.00Ground and polished surfaces Rounded edgesAED6.00 -
Rennsteig
AED41.00Working edge with brazed, precision ground carbide tipPolishedAED41.00 -
Rennsteig
AED8.00Ground and polishedAffected tools comply with DIN 7250AED8.00 -
Rennsteig
AED12.00Ground and polishedAffected tools comply with DIN 7250AED12.00 -
Rennsteig
AED5.00Ground and polishedAffected tools comply with DIN 7250AED5.00 -
Rennsteig
AED5.00Ground and polishedAffected tools comply with DIN 7250AED5.00 -
Rennsteig
AED73.00Items Included:6x Parallel Pin Punches (3, 4, 5, 6, 8, 10mm)AED73.00 -
Rennsteig
AED225.00Comes with hand protectionPolishedItems Included:5x Parallel Pin PunchesAED225.00 -
Rennsteig
AED34.00Items Included:Taper Punch Sets;Dia. 1mm/2mm/3mm/4mm /5mm and Centre Punch Dia. 4mmAED34.00 -
Rennsteig
AED85.00Tool set with handguards in plastic case, 5-pieceItems Included:1 Flat Cold Chisel 125mm (Art. No. 312 126 0);1 Crosscut Chisel 125mm (Art. No. 322 126 0);1 Centre Punch, Dia. 4mm (Art. No. 430 122...AED85.00 -
Rennsteig
AED20.00Affected tools comply with DIN 6455AED20.00 -
AED32.00 -
AED10.00 -
AED42.00 -
AED17.00 -
AED14.00 -
AED12.00 -
AED9.00 -
Rennsteig
AED25.00Octagonal cross-sectionAED25.00 -
Rennsteig
AED21.00Octagonal cross-sectionAED21.00 -
Rennsteig
AED22.00Flat oval cross-sectionAffected tools comply with DIN 725AED22.00 -
Rennsteig
AED19.00Flat oval cross-sectionAffected tools comply with DIN 725AED19.00 -
Rennsteig
AED16.00Flat oval cross-sectionAffected tools comply with DIN 725AED16.00 -
Rennsteig
AED21.00Affected tools comply with DIN 7256AED21.00