Kee Safety Single Socket Tee, 10-8, Kee Klamp, 48.3MM
(No reviews yet)
Write a Review
- Brand:
- Kee Safety
- SKU:
- 591464519715
- Minimum Purchase:
- 1 unit
- Item Name:
- Single Socket Tee
- Model:
- 10-8
- Manufacturer:
- Kee Safety
- Outer Diameter (MilliMeter):
- 48.3mm
- Loading Capacity:
- 2000 lbs. per set screw
- Pipe Size:
- 1.9 Inch
- Angle:
- 90 Degree
- Set Screw:
- Case-Hardened
- Brand Origin (not manufacture):
- United Kingdom
- Standards:
- ISO 1461
- Delivery Time:
- 2-7 Days
- Unit:
- Piece
Description
Kee Safety Single Socket Tee is designed to give a 90 Degree butt joint between two tubes.
View AllClose
- Frequently used for the joint between end uprights and middle rail where the railing site is straight and level
- Also used for base ties on racking
- This fitting cannot be used where the tube passing through the sleeve is required to be jointed within the fitting
- High corrosion resistance
- Quick installation
- Standards: ASTM A47-77-32510
Item Name: |
Single Socket Tee |
Model: |
10-8 |
Manufacturer: |
Kee Safety |
Outer Diameter (MilliMeter): |
48.3mm |
Loading Capacity: |
2000 lbs. per set screw |
Pipe Size: |
1.9 Inch |
Angle: |
90 Degree |
Set Screw: |
Case-Hardened |
Brand Origin (not manufacture): |
United Kingdom |
Standards: |
ISO 1461 |
Delivery Time: |
2-7 Days |
Unit: |
Piece |
Related Products
Available on Request
Kee Safety
Kee Safety Three Socket Tee, 25-8, Kee Klamp, 48.3MM
AED51.50
Kee Safety Three Socket Tee is the most commonly used as the 90 Degree joint between the top rail and an intermediate upright on safety railing.As there are two socket set screws in the sleeve, this...
Available on Request
Kee Safety
Kee Safety Standard Railing Flange, 62-8, Kee Klamp, 48.3MM
AED74.00
Kee Safety Standard Railing Flange is ideal when a structural fixing is required, when fixing guard railing and balustrades, Type 62 should always be used. The holes are of sufficient diameter to...
Available on Request
Kee Safety
Kee Safety 90 Degree Elbow, 15-8, Kee Klamp, 48.3MM
AED42.50
Kee Safety 90 Degree Elbow joint, is most frequently used as an end joint for the top rail of safety railing on a level site.High corrosion resistanceNo welding or threadingGalvanized for long...
Available on Request
Kee Safety
Kee Safety 30 to 60 Degree Single Socket Tee, 29-8, Kee Klamp, 48.3MM
AED47.00
Kee Safety 30 to 60 Degree Single Socket Tee is an adjustable fitting which is most frequently used for struts and braces. It can be used at any selected angle between 30 and 60 degrees.High...
Available on Request
Kee Safety
Kee Safety Straight Coupling, 14-8, Kee Klamp, 40MM
AED35.50
Kee Safety Straight Coupling is designed to form an in-line joint between two pieces of tube of the same size.If a constant diameter is required along the outside of the tube (such as for DDA...