Kee Safety Straight Coupling, 14-8, Kee Klamp, 40MM
(No reviews yet)
Write a Review
- Brand:
- Kee Safety
- SKU:
- 588983486767
- Minimum Purchase:
- 1 unit
- Item Name:
- Straight Coupling
- Model:
- 14-8
- Manufacturer:
- Kee Safety
- Material:
- Ductile Iron
- Outer Diameter (MilliMeter):
- 40mm
- Loading Capacity:
- 2000 lbs. per set screw
- Set Screw:
- Case-Hardened
- Brand Origin (not manufacture):
- United Kingdom
- Standards:
- ISO 1461
- Delivery Time:
- 2-7 Days
- Unit:
- Piece
Description
Kee Safety Straight Coupling is designed to form an in-line joint between two pieces of tube of the same size.
View AllClose
- If a constant diameter is required along the outside of the tube (such as for DDA handrail or garment storage), an internal spigot (type 18) should be considered.
- High corrosion resistance
- No welding or threading
- Galvanized for long lasting protection
- Recessed screws for a smooth look
- Quick installation
- Large set screws resists thread stripping
- Standards: ASTM A47-77-32510
Item Name: |
Straight Coupling |
Model: |
14-8 |
Manufacturer: |
Kee Safety |
Material: |
Ductile Iron |
Outer Diameter (MilliMeter): |
40mm |
Loading Capacity: |
2000 lbs. per set screw |
Set Screw: |
Case-Hardened |
Brand Origin (not manufacture): |
United Kingdom |
Standards: |
ISO 1461 |
Delivery Time: |
2-7 Days |
Unit: |
Piece |
Related Products
Available on Request
Kee Safety
Kee Safety Plastic Plug is a grey plastic plug to fit open ended tubes. It is suitable for medium and heavy tubing only.High corrosion resistanceNo welding or threadingGalvanized for long lasting...
Available on Request
Kee Safety
Kee Safety 30 to 45 Degree Adjustable Cross is an adjustable fitting that can be used for railing on staircases between the mid-rail and intermediate upright which is required to remain vertical...
Available on Request
Kee Safety
Kee Safety 90 Degree Elbow joint, is most frequently used as an end joint for the top rail of safety railing on a level site.High corrosion resistanceNo welding or threadingGalvanized for long...
Available on Request
Kee Safety
Kee Safety Standard Railing Flange is ideal when a structural fixing is required, when fixing guard railing and balustrades, Type 62 should always be used. The holes are of sufficient diameter to...
Available on Request
Kee Safety
Kee Safety Three Socket Tee is the most commonly used as the 90 Degree joint between the top rail and an intermediate upright on safety railing.As there are two socket set screws in the sleeve, this...
Available on Request
Kee Safety
Kee Safety Single Socket Tee is designed to give a 90 Degree butt joint between two tubes.Frequently used for the joint between end uprights and middle rail where the railing site is straight and...
Available on Request
Kee Safety
Kee Safety 30 to 60 Degree Single Socket Tee is an adjustable fitting which is most frequently used for struts and braces. It can be used at any selected angle between 30 and 60 degrees.High...
Available on Request
Kee Safety
Box Bolt is suitable for use with rectangular, square and circular steelwork sections, or other types of metalwork where access is restricted to one side only.It is a blind bolt connector that can be...
Available on Request
Kee Safety
Box Bolt is suitable for use with rectangular, square and circular steelwork sections, or other types of metalwork where access is restricted to one side only.It is a blind bolt connector that can be...