UAE Dirham
This Knipex end cutting nippers have a smooth operating box joint with zero backlash. Box joints are characterised by the fact that the inner handle is guided on both sides by two extensive bearing surfaces in the outer handle. This prevents the tilting movements which are typical with lap joints, and has a positive effect on the quality of cutting processes and tool life. The handles are conductive and not insulating and therefore permit a slow, safe charge equalisation. Instead of chrome-plating, the Knipex 64 12 115 ESD end cutting nippers have a mirror polish and a fine oil film as corrosion protection. The pliers therefore have adequate corrosion protection during workshop use; it is sufficient for the oil film to be replaced occasionally. There is no chrome-plating, therefore no pieces of chrome can peel off and fall onto printed circuit boards. In tight spaces, e.g. on printed circuit boards, cutting is often best done from above. The Knipex 64 12 115 ESD electronics end cutting nippers are ideal here. Unlike with diagonal cutters, where the cutting edges are a relatively straight extension of the handle, the cutting edges on end cutting nippers are at right angles to the handles.
- Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics
- Electrically discharging handles - dissipative
- Sturdy, zero backlash box joint
- Low-friction double spring for gentle and even opening
- The mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools
- Cutters additionally laser hardened, cutter hardness at least 56 HRC
- Handles with two-colour multi-component grips (black/grey)
- End Cutter, with small bevel
- Ball bearing chrome steel, oil hardened
