Anbi 90 Deg Tee, PVCTE430075, 3/4 Inch
- Brand:
- Anbi
- SKU:
- 824794594495
- Minimum Purchase:
- 1 unit
- Item Name:
- 90 Deg Tee
- Model:
- PVCTE430075
- Product Series:
- TE43
- Manufacturer:
- Anbi
- Material:
- UPVC
- Color:
- Grey
- Length (MilliMeter):
- 66mm
- Outer Diameter (MilliMeter):
- 33.5mm
- Angle:
- 90 Degree
- Pressure Range:
- Greater than 10 Bar
- Brand Origin (not manufacture):
- United Arab Emirates
- Approvals:
- WRAS
- Unit:
- Piece
Description
Anbi UPVC 90 degree tees is designed to link three pieces of UPVC pipe together at right angles to each other. The flow characteristics of a PVC Tee is different depending which branch of the tee the fluid is entering and leaving. If going straight through, the friction loss is quite low (slightly more than a straight piece of pipe) but when the fluid is passing through 90 degrees (in or out the branch), friction loss is much greater than that.
View AllClose
- The plain 90 degree tee has solvent cement sockets at either end
- They are fully approved for use with drinking water
Item Name: |
90 Deg Tee |
Model: |
PVCTE430075 |
Product Series: |
TE43 |
Manufacturer: |
Anbi |
Material: |
UPVC |
Color: |
Grey |
Length (MilliMeter): |
66mm |
Outer Diameter (MilliMeter): |
33.5mm |
Angle: |
90 Degree |
Pressure Range: |
Greater than 10 Bar |
Brand Origin (not manufacture): |
United Arab Emirates |
Approvals: |
WRAS |
Unit: |
Piece |
Related Products
Anbi
AED35.00
Anbi Gate Valve with features - Non Rising Stem, Solid Brass Wedge, High Quality PTFE Packing.Max pressure - temperature upto 100 Deg.C - 20 Bar, temperature upto to 180 Deg.C - 9 Bar.BS2779 parallel...
Anbi
AED3.00
Anbi PVC High Pressure Socket is designed to link two pieces of UPVC pipe together in a straight line.PVC pipe of the same size category is solvent cemented into each sideThey are fully approved for...
Available on Request
Comer
The Comer Elbow is made with the highest quality materials and with the latest technology in manufacturing.Made of U-PVC material Tested for quality and strength
Anbi
AED12.00
Anbi Test Plugs provides an economical solution to installing pressure and temperature gauges in chilled water systems.Cost effective aids for measuring pressure and temperature in fluid lines.Used...
Available on Request
Comer
The Comer Elbow is made with the highest quality materials and with the latest technology in manufacturing.Made of U-PVC material Tested for quality and strength
Anbi
AED87.00
Anbi Gate Valve with features - Non Rising Stem, Solid Brass Wedge, High Quality PTFE Packing.Max pressure - temperature upto 100 Deg.C - 20 Bar, temperature upto to 180 Deg.C - 9 Bar.BS2779 parallel...
Available on Request
Comer
The Comer Elbow is made with the highest quality materials and with the latest technology in manufacturing.Made of U-PVC material Tested for quality and strength
Anbi
AED160.00
Anbi Gate Valve with features - Non Rising Stem, Solid Brass Wedge, High Quality PTFE Packing.Max pressure - temperature upto 100 Deg.C - 20 Bar, temperature upto to 180 Deg.C - 9 Bar.BS2779 parallel...
Anbi
AED52.00
Anbi Gate Valve with features - Non Rising Stem, Solid Brass Wedge, High Quality PTFE Packing.Max pressure - temperature upto 100 Deg.C - 20 Bar, temperature upto to 180 Deg.C - 9 Bar.BS2779 parallel...