Brand: Dolphin
Dolphin High-Temp Silicone Sealant, 120 RTV, 90ML, PK12
378611126458
378611126458
(No reviews yet)
Write a Review
Payment Methods Accepted
Visa
Mastercard
Pay
POS Card
Cash On Delivery
Bank Transfer
SUPPLYVANTAGE
Original
Products
Products
Warranty
Against Defects
Against Defects
Returns &
Refund Policy
Refund Policy
Dedicated
Support
Support
100% Client
Protection
Protection
Frequently bought together:
Description
Dolphin High-Temperature Silicone Sealant is a single component Acetic cure range sealant, which is cured by atmospheric moisture. It is made of 100% RTV silicone and exhibits a negligible amount of shrinkage. Recommended for sealing and bonding the High-Temperature exposed substrates.
View AllClose
- Gasket Maker
- 100% RTV Silicone
- Negligible Shrinkage
- Skin Over Time: Approx. 7 minutes
- Tack Free Time: Approx. 12 minutes
- Depth Cure, 24 hrs.: 2.8 Milimeter
- Hardness (Shore A): 23 - 27 Points
- Elongation: < 650%
- Young's Modulus: < 0.29%
- Consistency: Homogeneous
- Joint Movement Capability: +/- 25%
- Cure Type: Acetoxy
- Cure Mechanism: Moisture
Item Name: |
Silicone Sealant |
Product Series: |
120 RTV |
Manufacturer: |
Dolphin |
Size: |
90ml |
Care Instructions: |
When stored in original unopened container at or below 77 deg.F (25 deg.C) in dry warehouse, Containers should always be kept sealed when not in use |
Lifetime: |
18 Months |
Specific Gravity: |
1.01 (+/-0.02)g/cu. cm |
Packing Type: |
Tube |
Tensile Strength: |
< 1.00 N/mm sq. |
Chemical Base: |
1-C Silicone |
Application Method: |
Application surface should be dry and dust, rust and grease-free. Cut the nozzle at an angle of 45 deg. and apply sealant on a substrate. Tool immediately to spread the sealant against the surface to give it a smooth finish. |
Safety Warnings: |
Over exposure to vapor may irritate eyes, nose and throat. In case of eye contact, flush eyes with water for 15 minutes. Obtain medical attention. In case of skin contact, remove from skin and flush with water. |
Service Temperature (Degree Celsius): |
-40 to +300 deg.C |
Application Area: |
Interior Application Only, Gasket Making, Electrical insulation, Sealing, cooking and heating equipment, Transmission cover, Timing case, Engine side cover, Sealant for solar modules, Marine Freight containers, Water pump mounting |
Delivery Time: |
2-7 Days |
Unit: |
Pack |
