Brand: Dolphin
Dolphin MDF Bond Cyanoacrylate Adhesive, 200ML, PK24
685499185653
685499185653
(No reviews yet)
Write a Review
Payment Methods Accepted
Visa
Mastercard
Pay
POS Card
Cash On Delivery
Bank Transfer
SUPPLYVANTAGE
Original
Products
Products
Warranty
Against Defects
Against Defects
Returns &
Refund Policy
Refund Policy
Dedicated
Support
Support
100% Client
Protection
Protection
Frequently bought together:
Description
Dolphin MDF Bond kit is a fast curing adhesive which is composed of cyanoacrylate adhesive and aerosol activator.
View AllClose
- High bonding strength
- Suitable for use on an inclined surface, horizontal, vertical and overhead application
- Suitable to bond on an uneven and rough surface
- Particularly suited to bond difficult substrates
- It increases the bonding strength by preventing the adhesive to be absorbed by the surface
- Store at a temperature of 25 Degree C or below. Airtight bottle cap after use
Item Name: |
Cyanoacrylate Adhesive |
Manufacturer: |
Dolphin |
Size: |
200ml |
Application Area: |
Good for bonding MDF, Stone, Marble, Wood, Chip wood, Rubber, Most Plastic, Leather, Cork, Ceramic, Most Metals, etc. |
Application Method: |
Apply 2 - 3 drops cyanoacrylate adhesive to one surface and activator spray to another surface. Assemble and hold both pieces for at least 12 seconds with hand pressure. |
Temperature Resistance: |
-20 to 70 deg.C |
Safety Warnings: |
Avoid exposure to light and heat, Cyanoacrylate can bond to skin within seconds, Can cause serious damage to skin and eyes, It will become hard if the container is not sealed properly, Do not throw the activator in fire. |
Care Instructions: |
Temperature is a critical factor in storing this material, hence material should must be kept below 25 deg.C. Stacking of 5.4 feet should be done in the warehouse, In the case of direct contact, rinse immediately with water. Do not ingest. |
Packing Type: |
Aerosol Can |
Direction To Use: |
Clean the surface before application, Move the adhesive nozzle on the targeted areas as the adhesive drips out, Spray the activator on the other surface, Join both surfaces and press them firmly with your hands for one minute. |
Delivery Time: |
2-7 Days |
Unit: |
Pack |
