Dolphin PU Foam, 100, 750ML
- Brand:
- Dolphin
- SKU:
- 978252857219
- Minimum Purchase:
- 1 unit
- Item Name:
- PU Foam
- Manufacturer:
- Dolphin
- Material:
- Polyurethane
- Size:
- 750ml
- Delivery Time:
- 2-7 Days
- Unit:
- Piece
Description
Dolphin PU foam is a high-quality adhesive foam with excellent bonding strength that is applicable to a wide range of surfaces. It is commonly used in buildings to fill and enclosed spaces between roof tiles, concrete slabs, wall cavities, drilled holes, frame construction, gaps around windows, and another substrate. It’s a single component, moisture-curing, and self-expanding polyurethane foam. Dolphin PU foam has quite a long shelf life provided you maintain good storage conditions. Always store the can in an upright position away from exposure to open flame, direct sunlight, and temperature exceeding 50 degrees celsius. Excessive heat can cause premature aging of components resulting in shorter shelf life. Keep away from (Strong) acids and (strong) bases. Store in a cool, dry, and well-ventilated area.
View AllClose
- Durable airtight seal: prevents air infiltration and energy loss
- High insulating value saves energy and money
- Shake the PU foam can vigorously for 45 to 60 seconds before and between uses
- Clean the surface from dirt, greases, and dust to facilitate maximum adhesion. For metallic surfaces, get rid of rust
- Protect adjacent surfaces with tape or plastic film
- Remove the seal cap and put clean nozzle spray
- Hold the cylinder upside down and dispense slowly. Spray the product in thin layers while moving your hand in one specific direction
- Fill the opening only 50 percent full to allow proper expansion. It usually takes 10 minutes for the hoam to cure properly
- Wait for 1 hour and then use a knife to smooth and trim excess foam. Recommended single layer thickness is 5-8 cm. You can apply several layers with a minimum of a 12 hours gap
- Overfilling and PU foam drops can be cleaned with paint thinner acetone, Toluene, or Nail polish remover
- It is advisable to use the entire quantity of a PU foam can within 2 hours of opening the can to avoid clogging of cured material inside the trigger and straw line or gun lines
Item Name: |
PU Foam |
Manufacturer: |
Dolphin |
Material: |
Polyurethane |
Size: |
750ml |
Delivery Time: |
2-7 Days |
Unit: |
Piece |
Related Products
Available on Request
Dolphin
Dolphin Fire Retardant PU Foam is self extinguishable, Class B2. The foam dispenses from the aerosol can is moisture cured and draws humidity from the air for cure.It is an economical and effective...
Available on Request
Dolphin
Dolphin Fire Retardant PU Foam is self extinguishable, Class B2. The foam dispenses from the aerosol can is moisture cured and draws humidity from the air for cure. It is an economical, convenient...
Available on Request
Dolphin
Dolphin PU Foam is the premium quality Polyurethane Foam. It has excellent bonding strength, that adheres to the wide range of surfaces. Building insulation that can fill and enclose spares between...
Available on Request
American Dolphin
American Dolphin PU Foam expands to take the shape of cracks and voids forming a permanent air tight and water proof bond to wood, metal, masonry, glass and most plastics. Curved paint can be sanded,...
Available on Request
Musu Tang
Multi-purpose triple expanding PU foam; used to fill and seal walls, joints, cavities and pipes