Flex Concrete Angle Grinder With Vacuum Cleaner, LD-18-7-plus-VCE-26, 1800W, 7000RPM, Black/Red

Vacuum Cleaner
Feature

Handy and compact vacuum cleaner, easy to use and easy to transport

The high-performance turbine ensures both a high suction capacity and a high vacuum. The outcome is an excellent extraction result

By actuating manual filter cleaning, dust deposited in the filter element is removed by a targeted blast of air

Level monitor, no malfunctions when drawing in liquids thanks to installed float valve

With appliance socket and electronic automatic switch on/off

Soft start stops any voltage peaks at the start and the run-on feature (5 sec. overrun) empties any remaining dust in the vacuum hose

Suction control, suction adapted to the tool by stepless control

With accessories magazine for suction nozzles and suction tubes on the back

Equipped with large wheels and two swivel guide rollers

Suitable for increased stress commercially (according EN 60335-2-69). Ideal for cleaning work in offices, storage rooms, workshops and vehicles. Smaller electric power tools, e.g. palm sander, delta sander, random-orbit sander, jigsaws, are primarily used for extraction work. Tools which produce fairly low amounts of dust

Features a filter bag made of highly tear-proof fleece for optimum filling. The extracted dust can be disposed of without difficulty

Safety vacuum cleaner, approved for dust class L, suitable for all dust with OEL value >1 mg/m³

Specifications

Power input max.: 1200 watt

Max. volume flow: 3600 Ltrs/min

Max. vacuum: 21000 Pa

Filter surface: 3000 sq.cm

Container volume: 25 Ltrs

Liquid capacity: 16 Ltrs

Power take off: 100-2600 watt

Cable length: 7.5 Mtrs

Size (W x L x H): 475 x 377 x 526 mm

• Microprocessor electronics: with consistent speed control, soft start, overload protection and temperature monitoring
• Reliable 1800 watt high-performance motor with sufficient power reserves
• Vacuum dust collection: protects against abrasive dust, reduces disc wear, keeps concrete pores for the new coat open
• Recessed spindle lock, to avoid unintentional activation
• With steplessly adjustable, vibration-proof, ergonomic bail handle, for optimum handling and machine control
• Guard with pivoting segment to allow grinding right up to the wall. Height-adjustable to the disc height and for optimum dust extraction
• Adapter for FLEX clip-system as standard equipment
• 125 mm diameter, ideal for application on small or medium size floor, wall or ceiling areas
• Grinding disc for abrasive materials. For removal of formwork transitions and concrete runs from freshly concreted surfaces, mineral adhesives, screeds, plaster, mortar, abrasive lime sand brick, sandstone, chamotte, asphalt.

Items Included:
2x PCD Grinding Disc, 2x Turbo Jet Diamond Grinding Disc, 1x Screed Jet Diamond Grinding Disc, 1x Thermo Jet Diamond Grinding Disc, 1x Surface Jet Diamond Grinding Disc, 1x Diamond Grinding Disc, 1x Carrying Case, 1x Fixing Pad, 4x Brush Ring, 1x ExtractionHood with Pioting Edge segment, 1x Vacuum Cleaner