null

Karcher Submersible Dirty Water Pump Level Sensor, 16458520, 750W, 0.8 Bar, 22000 Ltr/Hr Flow Rate

(No reviews yet) Write a Review
Brand:
Karcher
SKU:
897357248797
Minimum Purchase:
1 unit
Item Name:
Submersible Dirty Water Pump Level Sensor
Manufacturer:
Karcher
Wattage:
750W
Flow Rate:
22000 Ltrs/Hr
Pressure:
0.8 Bar
Grain Size:
30mm
Max. Immersion Depth:
7 Mtrs
Run Time:
15 Sec
Thread Size:
1-1/2 Inch
Voltage:
230-240V
Frequency:
50/60 Hz
Cable Length:
10 Mtrs
Dimensions:
23.8 x 29.3 x 35.4cm
Delivery Time:
2-7 Days
Unit:
Piece
See Full Product Specs
  • Karcher Submersible Dirty Water Pump Level Sensor, 16458520, 750W, 0.8 Bar, 22000 Ltr/Hr Flow Rate
  • Karcher Submersible Dirty Water Pump Level Sensor, 16458520, 750W, 0.8 Bar, 22000 Ltr/Hr Flow Rate

Available on Request

Description

An individually adjustable level sensor starts the dirty water pump SP 22000 Dirt Level Sensor immediately upon contact with water. If the water level drops below the level sensor again, the pump stops automatically after 15 seconds. The extremely powerful submersible pump is ideal for draining, for example, large garden ponds, flooded basements or construction pits, as it can reliably pump out dirty water (dirt particles of up to 30mm) at a rate of up to 22000 l/h. With even dirtier water, the integrated pull-down stainless steel prefilter serves to protect against blockages. The submersible pump can also be switched to continuous operation by means of the Automatic/Manual switch. It can reliably pump water away down to a residual water level of 35 millimetres-both in continuous operation and in automatic mode, when the level sensor is set accordingly. With the Quick Connect connection thread, 1 Inch, 1-1/4 and 1-1/2 inch hoses can be connected without complication. Thanks to the stainless steel housing and robust slide ring sealing, the pump has a particularly long service life.
  • Delivery Temperature: max. 35 Deg.C
  • Delivery head: 8 Mtrs
  • Ceramic Face Seal: For an extra long lifetime
  • Level Sensor: Allows continuous setting of pump-on and pump-off levels. Automatically starts/stops (“Auto” mode) with a 15 s after-run delay to prevent dry running
  • Auto/Manual Switch: Manual continuous operation option
  • Built-in Stainless Steel Prefilter: Prevents clogging from large debris
  • Stainless Steel Housing & Slide‑Ring Seal: Provides robust build quality and long service life
  • Comfortable Handle: Also functions as a rope holder
Item Name:
Submersible Dirty Water Pump Level Sensor
Manufacturer:
Karcher
Wattage:
750W
Flow Rate:
22000 Ltrs/Hr
Pressure:
0.8 Bar
Grain Size:
30mm
Max. Immersion Depth:
7 Mtrs
Run Time:
15 Sec
Thread Size:
1-1/2 Inch
Voltage:
230-240V
Frequency:
50/60 Hz
Cable Length:
10 Mtrs
Dimensions:
23.8 x 29.3 x 35.4cm
Delivery Time:
2-7 Days
Unit:
Piece
View AllClose

0 Reviews

View AllClose
X