Knipex Snipe Nose Side Cutting Plier, 2526160, 160MM
(No reviews yet)
Write a Review
- Brand:
- Knipex
- SKU:
- 342412781946
- Minimum Purchase:
- 1 unit
- Item Name:
- Snipe Nose Side Cutting Plier
- Manufacturer:
- Knipex
- Handle Material:
- Insulated with multi-component grips. VDE-tested
- Color:
- Red and Yellow
- Finish:
- Chrome
- Length (MilliMeter):
- 160mm
- Jaw Length:
- 50mm
- Jaw Width:
- 16.5mm
- Thickness (MilliMeters):
- 9mm
- Tip Width:
- 3mm
- Jaw Bend:
- 40 Deg
- Cutting Capacity:
- Medium Hard Wire: 2.5 dia mm; Hard Wire: 1.6 dia mm.
- Standards:
- IEC 60900 DIN EN 60900
- Packing Size L x B x H (Cms):
- 17.5L x 5.0B x 1.7H
- Delivery Time:
- 2-7 Days
- Unit:
- Piece
Description
Knipex Snipe Nose Side Cutting Pliers - 2526160 has pliers chrome plated and has handles insulated with multi-component grips.
View AllClose
- Suitable for finer gripping and cutting work.
- Pointed, half-round jaws.
- Knurled gripping surfaces.
- Cutting edges for soft, medium-hard and hard wire.
- Cutting edges additionally induction hardened. Cutting edge hardness approx. 61 HRC.
- Vanadium electric steel, forged, oil-hardened.
- Handles insulated with multi-component grips, VDE-tested and chrome plated pliers.
Item Name: |
Snipe Nose Side Cutting Plier |
Manufacturer: |
Knipex |
Handle Material: |
Insulated with multi-component grips. VDE-tested |
Color: |
Red and Yellow |
Finish: |
Chrome |
Length (MilliMeter): |
160mm |
Jaw Length: |
50mm |
Jaw Width: |
16.5mm |
Thickness (MilliMeters): |
9mm |
Tip Width: |
3mm |
Jaw Bend: |
40 Deg |
Cutting Capacity: |
Medium Hard Wire: 2.5 dia mm; Hard Wire: 1.6 dia mm. |
Standards: |
IEC 60900 DIN EN 60900 |
Packing Size L x B x H (Cms): |
17.5L x 5.0B x 1.7H |
Delivery Time: |
2-7 Days |
Unit: |
Piece |
Related Products
Available on Request
Knipex
Knipex Snipe Nose Side Cutting Pliers (Stork Beak Pliers) - 2626200 has pliers chrome plated and has handles insulated with multi-component grips.High loadable, elastic precision points.Half-round,...
Available on Request
Knipex
For gripping, aligning and installation work and for cuttingKnipex primarily manufactures the forged and oil-hardened snipe nose side cutting pliers for gripping, alignment and installation work...
Knipex
AED116.00
Chrome plated headCutting capacity of medium hard wire is 3.2mm and hard wire is 2.2mmHandles insulated with multi-component grips, VDE-tested1000 Volt RatedHigh-grade special tool steel, forged,...
Knipex
AED94.00
Long tapered jaws make reaching into confined spaces easyResilient precision tips snap back into place even after being twistedSerrated gripping jaw surfacePrecision induction-hardened cutting...
Knipex
AED198.00
Pliers for gripping and holding – and for powerful cutting
The forged and oil-hardened snipe nose side cutting pliers from Knipex are primarily used for installation and assembly work and for the...
Available on Request
Knipex
For gripping and separating of single wires in harnessesWith centre cutter for soft wireHalf-round jawsKnurled gripping surfacesChrome vanadium electric steel, forged, oil-hardened
