The Parameterizable Analogue Distributor is used for duplicating an input signal to 2 galvanically isolated individual output signals. This guarantees a safe decoupling between sensor and evaluation circuit and any influence of other sensor circuits among each other is absolutely impossible.
- Attenuation adjustable via KALIB software (0.0 to 999.9 seconds)
- Parameterization without auxiliary energy via PC interface: Input: range, start, end, error limit, attenuation, Output: range, start, end, value on error, error limits
- Galvanic 4-way isolation of 1 kV
- Auxiliary power: 20 to 30VDC
- Low own consumption
- Auxiliary energy flow: < 0.1 Percent
- Housing: 6.2mm housing for DIN rail
- Parameterization without auxiliary power via PC-interface
- Galvanic 4-way isolation of 1 kV
- Low internal consumption
- Connection: screw clamps 0.14 to 2.5 sq.mm
- Transmission error: < 0.12 percent
- Setting time: < 50 msec