Weicon AL-H High Performance Grease, 26500100, 1 Kg

WEICON AL-H is suitable for rolling bearings, sliding bearings, joints, spindles, spline shafts and linear guidance systems at all sliding speeds permitted for grease lubrication. WEICON AL-H is particularly suited for usage in foodstuff technology.
Technical Data:

Abbreviation (DIN 51502): KPHC 1P -40

Consistency assignment (DIN 51818): NLGI-Class 1

Base: Aluminium complex soap / polyalphaolefine

Colour: Yellowish-White

Density at +20 Deg.C (+68 Deg.F) (DIN 51757): 0.93 g/cu.cm

VKA-TEST (DIN 51350) welding load: 1800 N

VKA-TEST (DIN 51350) goods load: 1700 N

VKA-TEST (DIN 51350) Spherical cap value (1Min/1000N): 0.6mm

Speed identifying value: 400.000

Worked penetration ( DIN ISO 2137): 310 - 340 1/10mm

Water resistance (DIN 51807): 1 - 90

Specific heat transfer capacity (20 Deg.C): 1838 J/(g·K)

Thermal diffusivity (20 Deg.C): 0.230 sq.mm/s

Thermal conductivity (ISO 22007-4) (20 Deg.C): 0.394 W/m·K

Dielectric strength (DIN EN 60243-1) (20 Deg.C): 29.6 kV/mm

Drop Point (IP 396): > 200 Deg.C

Kinematic viscosity (DIN 51562) at +40 deg.C: 400 sq.mm/s

Kinematic viscosity (DIN 51562) at +100 Deg.C: 40 sq.mm/s

EMCOR corrosion test (DIN 51 802): 1/1

Conforms to: NSF-H 1, LFGB Section 31 and Section 21

Storage Stability: 24 months

Temperature Resistance: -40 to +160 Deg.C

ISSA-Code: 53.052.20/21

IMPA-Code: 450439/40

• High temperature grease with NSF approval odourless and tasteless
• Clean Surface pre-treatment