Weicon CA-Activator AC Spray, 12505150, 150ml

The Activator speeds up the curing process of Weicon Cyanoacrylate Adhesives. When applied to absorbing surfaces, like for example wood or foam etc., and all chemically-treated surfaces, like for example zinc galvanized metals etc., the activator’s effectiveness lasts approx. one minute. With non-absorbent surfaces the Activator's effectiveness lasts up to approx. twelve hours. Use is recommendable with: highly viscous Weicon Contact types, large thickness of the adhesive layer, absorbing and porous surfaces, Passive materials (alkaline surfaces, like for example zinc coated metal parts), disadvantageous environmental conditions (low temperatures, too low air humidity < 30%).

• Activator for cyanoacrylate adhesive on the basis of acetone
• For joints without "blooming" effect, especially with high-viscosity types and larger adhesive layers
• For highly viscous Weicon contact types (or similar adhesives), large layer thicknesses, absorbent and porous surfaces, passive materials and unfavourable environmental conditions
• The spray meets the highest quality requirements under the observance of physical, safety, toxicological and ecological regulations
• Processing: With a distance of approx. Spray 30 cm on one of the surfaces to be glued and 30 seconds. wait. Apply the adhesive to the inactivated surface and assemble the parts