Weicon AL-M High Performance Grease, 26400500, 5 Kg, Black

WEICON AL-M reduces friction and wear for a long time and is suited for rolling and slide bearings, joints, levers, sliding guides, spindles, camshafts, spline shafts, springs, open gears, worm gears and at all sliding speeds permitted for grease lubrication.

Technical Data:

• Abbreviation (DIN 51502): KF 2 K -20
• Consistency assignment (DIN 51818): NLGI-Class 1
• Base: Li/Ca soap / MoS2 / mineral oil
• Colour: Black
• Density at +20 Deg.C (+68 Deg.F) (DIN 51757): 0.92 g/cu.cm
• VKA-TEST (DIN 51350) welding load: 3000 N
• VKA-TEST (DIN 51350) goods load: 3200 N
• VKA-TEST (DIN 51350) Spherical cap value (1Min/1000N): 0.5mm
• Worked penetration ( DIN ISO 2137): 265 - 295 1/10mm
• Water resistance (DIN 51807): 1 - 90
• Specific heat transfer capacity (20 Deg.C): 1766 J/(g·K)
• Thermal diffusivity (20 Deg.C): 0.303 sq.mm/s
• Thermal conductivity (ISO 22007-4) (20 Deg.C): 0.491 W/m·K
• Dielectric strength (DIN EN 60243-1) (20 Deg.C): 11.5 kV/mm
• Drop Point (IP 396): > 170 Deg.C
• Kinematic viscosity (DIN 51562) at +40 deg.C: 185 sq.mm/s
• Kinematic viscosity (DIN 51562) at +100 Deg.C: 14 sq.mm/s
• EMCOR corrosion test (DIN 51 802): 0/0
• Storage Stability: 24 months
• Temperature Resistance: -20 to +120 Deg.C
• ISSA-Code: 53.052.01/02
• IMPA-Code: 450435/36
• Long-life grease with MoS2 strong adhesion and high pressure resistant
• Clean Surface pre-treatment