Brand: Wurth
Wurth Bond and Seal Structural Adhesive, 08901006, 310ML, Beige
283999265743
283999265743
(No reviews yet)
Write a Review
Payment Methods Accepted
Visa
Mastercard
Pay
POS Card
Cash On Delivery
Bank Transfer
SUPPLYVANTAGE
Original
Products
Products
Warranty
Against Defects
Against Defects
Returns &
Refund Policy
Refund Policy
Dedicated
Support
Support
100% Client
Protection
Protection
Frequently bought together:
Description
- Chemical basis: Single component polyurethane
- Min./max. skin-formation time /conditions: 45-60 min / at 23 Deg.C and 50 Percent relative humidity, moisture curing
- Min. tensile strength: 1.8 N/Sq.mm
- Glass transition temperature/conditions: -45 Deg.C / in accordance with DIN 53445
- Max. change in volume: -5 Percent
- Shelf life from production/conditions: 12 Months/at 10 to 25 Deg. C
- Silicone-free, Not corrosive, Odourless
- Resistance against: Water, Lime water, Public sewage, Weak acids, Weak lyes, Salt water
- Short-term resistance against: Fuels, Mineral oils, Animal fat, Animal oils, Vegetable fat, Vegetable oils
- Suitable for gluing and sealing in food processing areas
- Following skin formation, can be mechanically machined and painted over without surface activation
- Highly Elastic: Absorbs vibrations and sounds, Bonding of identical and different substances possible, Compensation of different material expansions
- Can be ground/painted: Following skin formation, can be mechanically machined and painted over without surface activation (perform preliminary tests to check paint compatibility)
- Long skin formation time
Item Name: |
Bond and Seal Structural Adhesive |
Manufacturer: |
Wurth |
Color: |
Beige |
Size: |
310ml |
Flash Point: |
70 Deg.C |
Density: |
1.25 g/cube.cm |
Processing Temperature: |
5 to 35 Deg.C |
Direction To Use: |
The surfaces must be clean, dry and free from dust and grease. Processing temperature is between +5 C and +35 Deg. C |
Application: |
For a wide range of bonding and sealing work on surface materials such as metal, painted surfaces, wood, stone, concrete and plastic (polyester and hard PVC) |
Certification: |
ISEGA |
Safety Warnings: |
Do not allow this product to come into contact with alkyd-resin paint systems. Not suitable for glass groove sealing and for expansion joints in the construction sector. Direct sunlight may result in yellowing of the surface |
Delivery Time: |
2-7 Days |
Unit: |
Piece |
