Fluke 87V OffersIdentifies complex signal problems fastProvides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment. On top of that, this industrial multimeter effectively performs in loud, high energy, and high altitude locations. Features a low pass filter which supports precise frequency measurements on VFDs and acquires intermittents as quickly as 250 µS.
Use this multimeter to measure AC currents up to 10 A directly. Also, features a built-in thermometer that enables you to take temperature readings without having to carry a separate instrument and more. Plus, comes with a bright, two-level backlit display which allows you to see the results better in dim light.
Electrical safetyAll inputs are protected to the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V and CAT III, 1000 V. They can withstand impulses in excess of 8.000 V and reduce risks related to surges and spikes.
Correctly measure pulse-width modulated motor drive signalsUntil now, there hasn't been a multimeter able to accurately measure adjustable speed drives. Although, this industrial multimeter is designed specifically to handle these complex signals. Think of the potential productivity you'll gain by taking the guesswork out of drive system troubleshooting. Measurements are correct each and every time.
FeaturesUnique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipmentBuilt-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrumentOptional magnetic hanger for easy set-up and viewing while freeing your hands for other tasksLarge digit display with bright, two-level backlight makes the 87V significantly easier to read than older modelsTrue-rms ac voltage and current for accurate measurements on non linear signalsSelectable filter for accurate voltage and frequency measurements on motor drivesAuto and manual ranging for maximum flexibilityTouch Hold to capture stable readings avoiding noisy signalsLarge display digits and two-level bright white backlight for increased visibilityAnalog bargraph for fast changing or unstable signalsInput Alert provides audible warning against wrong use of input jacksImproved selectable sleep mode for long battery lifeAccess door for fast battery changes without breaking the calibration sealClassic design with new removable holster with built in test lead and probe storageUnique function for accurate measurements of noisy pulse-width modulated AC voltageMeasures correctly at the ASD and at the motor terminalsAccurately measure the frequency (motor speed), frequency measurement not affected by the ASDs carrier frequencyMeasure AC current with an optional current clamp accessoryCompare reading with the display on the ASDSpecial shielding blocks high frequency, high-energy noise generated by large drive systemsApplicationsIndustrialMaintenance & RepairTest & MeasurementMotors/VFDFluke TL224 SureGrip Silicone Insulated Test LeadsFeaturesDMM test leads (red, black) with safety shrouded, standard diameter banana plugsRight angle connector on one end and straight connector on the otherReinforced strain relief4.9 Feet (1.5 m) silicone-insulated wire resists heat and coldCAT IV 600 V, CAT III 1000 V, 10 A rating; CSA listedFluke AC220 SureGrip Alligator ClipsFeatures0.15 Inch (4 mm) of exposed metal at the tipProbe extenders fit between modular test leads and test probes, increasing the distance between you and a live circuit by 8" (20.5 cm)TP238 and TL224 conform to safety standard IEC 1010-2-031, maximum 1000 V CAT III, 600 V CAT IV, Pollution Degree 2, 10 AProbe extenders conform to safety standard IEC 1010-2-031, maximum 1000 V CAT III, Pollution Degree 2, 10 AFluke TPAK ToolPak Magnetic Meter HangerTake hands-free measurements with this magnetic meter hanger. The kit allows you to hang your meter in a variety of ways—including on nails, hooks and many other objects—solving any hanging and positioning problem you may face.
Please note that this product doesn't clip into the Fluke T6 Series like it does for other Fluke meters. Instead, you must simply feed the Velcro loop through the slot on the back of the T6 and Velcro it together.
FeaturesPowerful magnetic hanger allows you to hang your meter on any metallic surfaces9 Inch (228.6 mm) hook and loop strap allows you to loop around pipesHook hanger for hanging on non-magnetic surfacesGeneral purpose hanger allows you to hang your meter on nails, hooks and many other objectsFluke 80BK-A Integrated DMM Temperature ProbeFeaturesStandard shrouded banana jackConvenient one piece construction- 0.05% DC accuracy
- 6000 counts, 3-3/4 digits
- 4-1/2 digit mode for precise measurements (20,000 counts)
- Measure up to 1000VAC and DC
- Measure up to 10 A, 20 A for up to 30 seconds
- Built in thermometer lets you carry one less tool (TC probe included)
- Frequency to 200 kHz and % duty cycle
- Resistance, continuity and diode test
- 10,000 µF capacitance range for components and motor caps
- Min/max-average recording with min/max alert to capture variations automatically
- Peak capture to record transients as fast as 250 µs
- Relative mode to remove test lead interference from low ohms measurements
Items Included:
1x Fluke 87V Industrial True RMS Multimeter with Temperature, 2x Fluke TL224 SureGrip and trade, Silicone Insulated Test Leads, 2x Fluke AC220 SureGrip and trade; Alligator Clips, 4x Fluke TL238 SureGrip and trade; Test Lead Set for high energy environments, 1x Fluke TPAK ToolPak Magnetic Meter Hanger, 1x Fluke 80BK-A Integrated DMM Temperature Probe, 1x Fluke C35 Soft Carrying Case