Mapei Kerapoxy is a two-component, epoxy-resin-based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. This is a product with very low emission of volatile organic compounds and is classified as Emicode EC1 Plus by GEV when used for grouting.
Excellent mechanical and chemical resistance, therefore excellent durability
A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene
Easy workability and finishing
Becomes very hard and is highly resistant to heavy traffic
No shrinkage, therefore the absence of cracks and fissures
Uniform colors that are resistant to ultra-violet rays and atmospheric agents
Excellent bonding
Emicode (as a grout): EC1 Plus - very low emission
Component A Specifications:
Consistency: Thick Paste
Density: 1.64 gm/cu.cm
Dry Solids Content: 100%
Brookfield Viscosity: 3,500,000 mPa
Component A Specifications:
Consistency: Dense Liquid
Density: 0.97 gm/cu.cm
Dry Solids Content: 100%
Brookfield Viscosity: 900 mPa
Application Data (at 23 Deg.C and 50% RH)
Mix Ratio: Component A : Component B = 9:1
Consistency of Mix: Thick Paste
Density of Mix: 1550 Kg/cu.m
Pot Life: 45 Minutes
Application Temperature: 12 to 30 Deg.C
Open Time (as an adhesive): 30 Minutes
Adjustability Time (as an adhesive): 60 Minutes
Set to Light Foot Traffic: 24 Hours
Flexural Strength (EN 12808-3): 31 N/sq.mm
Compressive Strength (EN 12808-3): 55 N/sq.mm
Resistance to Abrasion (EN 12808-2): 147
Water Absorption (EN 12808-5): 0.05gm
Temperature in Use: -20 to 100 Deg.C
UAE Dirham
