Vertical Categories

Hotline Free:06-900-6789-00

Evo-Stik Bathroom and Kitchen Sealant, 30614369, 280ML, White

(No reviews yet) Write a Review
Brand
SKU:
345949916921
Minimum Purchase:
1 unit
Item Name:
Bathroom and Kitchen Sealant
Manufacturer:
Evo-Stik
Color:
White
Size:
280ml
Storage Temperature:
5 to 25 Deg.C
Working Temperature:
5 to 40 Deg.C
Service Temperature (Degree Celsius):
-20 to 70 Deg.C
Chemical Composition:
Blend of acrylic polymers and selected fillers
Form:
Soft Gunnable Paste
Coverage Area:
Approx. 10 linear metres of 6mm diameter bead
Shelf Life:
24 Months
Packing Type:
Cartridge
Application:
Glass, Stainless Steel, Ceramics, Plastic Baths and Fittings
Brand Origin (not manufacture):
United Kingdom
Warranty (Subject to Conditions):
6 Months
Delivery Time:
2-7 Days
Unit:
Piece
See Full Product Specs
AED45.00 (Incl.VAT)
Evo-Stik Bathroom and Kitchen Sealant, 30614369, 280ML, White

Evo-Stik Bathroom and Kitchen Sealant, 30614369, 280ML, White

SKU: 345949916921

Evo-Stik Bathroom and Kitchen Sealant is simple to apply and easy to clean. As the name suggests, it’s ideal for sealing baths, sinks and kitchen units. Containing a fungicide to discourage mould, it is guaranteed to last for up to 15 years.

Preparation:

  • Work in warm but well ventilated conditions
  • Joint surfaces must be clean, dry, sound and free from dust and other contaminants that may impair adhesion
  • If desired place masking tape along the joint edges before application. This can make it easier to make a neat, tooled finish. Use a spatula with a round end to tool the sealant and check that this tool just fits into the gap between the masking tape so that it catches the excess sealant
  • Do a test run without applying any sealant to ‘get a feel’ for the difficult areas to seal in corners, behind taps and raised joints
  • Application:

  • Unscrew the nozzle, and using a sharp knife, carefully cut off the dome of the cartridge, taking care not to damage the thread. Screw the nozzle onto the cartridge
  • Cut off the tapered end of the nozzle at a 45 degree angle, to a width matching the gap to be sealed
  • Fit the cartridge into the cartridge gun by pressing the release plate and pulling out the plunger. Insert cartridge and repeatedly squeeze the trigger until the sealant appears
  • Place the nozzle at the start of the gap, and gently squeeze the trigger. Push forward slowly, ensuring that contact is made by the sealant with both sides of the gap. At the end of the run, release the trigger and press the plunger release plate of the gun
  • Smooth the sealant with a wet, round ended tool within 10 minutes (do not use a wetted finger), remove any excess with a cloth moistened with white spirit and then remove the masking tape from either side of the bead
  • After use, ensure the cap is replaced to prevent nozzle from clogging
  • The sealant skins over rapidly (approx. 15 to 60 minutes) and is fully cured in 1 to 7 days depending on bead width, temperature and humidity

    • Mould resistant
    • Guaranteed up to 15 years
    • Suitable for sealing around baths, sinks and kitchen units
    • Single-part emulsion paste that dries to form a durable flexible seal
    • Contains a fungicide to discourage mould growth
    • Offers excellent adhesion to non-porous surfaces such as plastic and plastic sanitary ware