Evo-Stik Strong Stuff Waterproof Adhesive will bond to wet surfaces inside or outside the home even underwater! It has a very low odour and is perfect for a range of DIY and repair jobs.
Preparation:
Any loose or weak layers and any contamination on the surface must be removed
Surfaces must be clean and preferably dry
Application:
Apply parallel beads of adhesive to one of the surfaces. Ensure that the adhesive is forced onto the surface to displace dampness
Bring the two surfaces together, quickly after application. Then press and twist to force the adhesive onto the other surface
5mm diameter beads are generally sufficient. For close fitting surfaces these may be reduced to 3mm
The degree of separation of the beads of Evo-Stik Serious Stuff Wet Grab Adhesive will depend upon the rigidity and weight of the panel, board or sign being bonded. If beads are separated by more than 200mm a perimeter bead should be applied
For rigid sheets 100 - 150mm separation between beads is generally sufficient for high loading, but may be increased if the load is low (such a wallboards and foam polystyrene) where 200 - 500mm is acceptable
For less rigid boards the separation may need to be quite small and it is important to choose the correct bead size- Bonds to wet surfaces, even underwater
- Sticks most materials
- Suitable for interior and exterior use