Vertical Categories

Hotline Free:06-900-6789-00

Evo-Stik Window and Door Frame Sealant, 30614368, 290ML, White

(No reviews yet) Write a Review
Brand
SKU:
525267172852
Minimum Purchase:
1 unit
Item Name:
Window and Door Frame Sealant
Manufacturer:
Evo-Stik
Color:
White
Size:
290ml
Storage Temperature:
5 to 25 Deg.C
Working Temperature:
5 to 40 Deg.C
Service Temperature (Degree Celsius):
-20 to 70 Deg.C
Chemical Composition:
Blend of acrylic polymers and selected fillers
Form:
Soft Gunnable Paste
Coverage Area:
Approx. 10 linear metres of 6mm diameter bead
Shelf Life:
24 Months
Packing Type:
Cartridge
Application:
Aluminium, Metal, Mortar, Brickwork, Wood, uPVC Door and Window Frames
Brand Origin (not manufacture):
United Kingdom
Warranty (Subject to Conditions):
6 Months
Delivery Time:
2-7 Days
Unit:
Piece
See Full Product Specs
AED45.00 (Incl.VAT)
Evo-Stik Window and Door Frame Sealant, 30614368, 290ML, White

Evo-Stik Window and Door Frame Sealant, 30614368, 290ML, White

SKU: 525267172852

Evo-Stik Window and Door Frame Sealant is a flexible, easy to apply acrylic sealant designed to weatherproof and draught-proof door and window frames. Suitable for both interior and exterior use, the sealant is overpaintable when dry and guaranteed to last for up to 15 years.

Preparation:

  • Work in warm but well ventilated conditions
  • Joint surfaces must be clean, dry, sound and free from dust and other contaminants that may impair adhesion
  • If desired place masking tape along the joint edges before application. This can make it easier to make a neat, tooled finish. Use a spatula with a round end to tool the sealant and check that this tool just fits into the gap between the masking tape so that it catches the excess sealant
  • Do a test run without applying any sealant to ‘get a feel’ for the difficult areas to seal in corners, behind taps and raised joints
  • Application:

  • Unscrew the nozzle, and using a sharp knife, carefully cut off the dome of the cartridge, taking care not to damage the thread. Screw the nozzle onto the cartridge
  • Cut off the tapered end of the nozzle at a 45 degree angle, to a width matching the gap to be sealed
  • Fit the cartridge into the cartridge gun by pressing the release plate and pulling out the plunger. Insert cartridge and repeatedly squeeze the trigger until the sealant appears
  • Place the nozzle at the start of the gap, and gently squeeze the trigger. Push forward slowly, ensuring that contact is made by the sealant with both sides of the gap. At the end of the run, release the trigger and press the plunger release plate of the gun
  • Smooth the sealant with a wet, round ended tool within 10 minutes (do not use a wetted finger), remove any excess with a cloth moistened with white spirit and then remove the masking tape from either side of the bead
  • After use, ensure the cap is replaced to prevent nozzle from clogging
  • The sealant skins over rapidly (approx. 15 to 60 minutes) and is fully cured in 1 to 7 days depending on bead width, temperature and humidity

    • Use for sealing around window and door frames
    • Overpaintable
    • 15 year guarantee
    • Suitable for interior and exterior use