Weicon AN 301-48 Retaining Cylindrical Assemblies, 30148150, Weiconlock, 50ML
(No reviews yet)
Write a Review
- Brand:
- Weicon
- SKU:
- 531831431153
- Minimum Purchase:
- 1 unit
- Item Name:
- Retaining Cylindrical Assemblies
- Product Series:
- Weiconlock
- Manufacturer:
- Weicon
- Color:
- Green
- Size:
- 50ml
- Height:
- 19cm
- Final Strength:
- 2 to 4 Hrs
- Care Instructions:
- WEICONLOCK can be stored in the unopened original container for at least 24 months at room temperature. Keep away from heat sources and direct sunlight. The air in the bottle/tube keeps WEICONLOCK liquid.
- Temperature Resistance:
- -60 to 175 Deg.C
- Brand Origin (not manufacture):
- Germany
- Delivery Time:
- 2-7 Days
- Unit:
- Piece
Description
WEICONLOCK is ready for use and should be applied evenly direct from the bottle/tube with the dispensing tip (avoid direct contact of dispensing tip with metal). On press fitted parts and larger cylindrical assemblies a thin and uniform layer should be applied on both surfaces. Join parts quickly. For sliding seats, turn the parts against each other when joining for an optimal distribution of the adhesive. Joint parts should not be moved until handling strength is reached. Do not pour back into the bottle any WEICONLOCK fluid which had contact with metal; even smallest metal particles will cause the content of the bottle to cure. In series construction, the use of manual or automatic applicators is recommended.Technical DataFor threaded joints up to: M20 R 3/4 Inch Viscosity at 25 Deg.C According to Brookfield: 450 - 650 mt mPa新 Max. Gap Bridging: 0.15mm Breakaway Strength (Thread): 25 - 30 Nm Prevailing Stregth: 40 - 55 Nm Shear Strength (DIN 54452): 25 - 30 N/sq.mm Handling Strength at Room Temperature: 2 to 6 Min Final Strength (100%) After: 2 to 4 Hrs Temperature Resistance: -60 to +175 Deg.C
View AllClose
- Medium viscosity
- High strength
- Hard to disassemble
Item Name: |
Retaining Cylindrical Assemblies |
Product Series: |
Weiconlock |
Manufacturer: |
Weicon |
Color: |
Green |
Size: |
50ml |
Height: |
19cm |
Final Strength: |
2 to 4 Hrs |
Care Instructions: |
WEICONLOCK can be stored in the unopened original container for at least 24 months at room temperature. Keep away from heat sources and direct sunlight. The air in the bottle/tube keeps WEICONLOCK liquid. |
Temperature Resistance: |
-60 to 175 Deg.C |
Brand Origin (not manufacture): |
Germany |
Delivery Time: |
2-7 Days |
Unit: |
Piece |
Related Products
Weicon
AED105.00
WEICONLOCK is ready for use and should be applied evenly direct from the bottle/tube with the dispensing tip (avoid direct contact of dispensing tip with metal). On press fitted parts and larger...
Weicon
AED100.00
Surface pre-treatmentIn general, WEICONLOCK does not require special pre-treatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results will be achieved on...
Weicon
AED100.00
Retaining cylindrical assemblies under high dynamical stress, medium viscosity, high strength.In general, Weiconlock does not require special pre-treatments slightly oily surfaces (e.g. on as...
Weicon
AED110.00
Surface pre-treatmentIn general, WEICONLOCK does not require special pre-treatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results will be achieved on...
Weicon
AED110.00
Surface pre-treatmentIn general, WEICONLOCK does not require special pre-treatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results will be achieved on...
Weicon
AED110.00
Surface pre-treatmentIn general, WEICONLOCK does not require special pre-treatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results will be achieved on...
Weicon
AED100.00
Retaining cylindrical assemblies, high temperature resistant, slow cure.In general, Weiconlock does not require special pretreatment as slightly oily surfaces (e.g. on as received parts) will be...
Weicon
AED100.00
Surface pre-treatmentIn general, WEICONLOCK does not require special pre-treatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results will be achieved on...
Weicon
AED100.00
Surface pre-treatmentIn general, WEICONLOCK does not require special pre-treatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results will be achieved on...