Weicon AN 302-25 Pipe and Thread Sealing, 30225150, Weiconlock, 50ML
(No reviews yet)
Write a Review
- Brand:
- Weicon
- SKU:
- 623557928483
- Minimum Purchase:
- 1 unit
- Item Name:
- Pipe and Thread Sealing
- Product Series:
- Weiconlock
- Manufacturer:
- Weicon
- Color:
- Brown
- Size:
- 50ml
- Final Strength:
- 3 to 6 Hrs
- Height:
- 19cm
- Care Instructions:
- WEICONLOCK can be stored in the unopened original container for at least 24 months at room temperature. Keep away from heat sources and direct sunlight. The air in the bottle/tube keeps WEICONLOCK liquid.
- Temperature Resistance:
- -60 to 150 Deg.C
- Brand Origin (not manufacture):
- Germany
- Delivery Time:
- 2-7 Days
- Unit:
- Piece
Description
Screw pipe threads together and tighten until desired orientation. When using as flange sealing apply a continuous bead on one side. Join and tighten parts quickly. Do not pour back into the bottle any WEICONLOCK fluid which had contact with metal; even smallest metal particles will cause the content of the bottle to cure. In series construction, the use of manual or automatic applicators is recommended.Technical DataFor Threaded Joints Upto: M80 R 3 Inch Viscosity at 25 Deg.C According to Brookfield: 6.000 - 30.000 mt mPa新 Max. Gap Bridging: 0.3mm Breakaway Strength (Thread): 5 - 8 Nm Prevailing Stregth: 2 - 4 Nm Shear Strength (DIN 54452): 3 - 5 N/sq.mm Handling Strength at Room Temperature: 15 - 30 Min Final Strength (100%) After: 3 - 6 Hrs Temperature Resistance: -60 to 150 Deg.C
View AllClose
- Higher viscosity
- Low strength
- Easy disassembly
Item Name: |
Pipe and Thread Sealing |
Product Series: |
Weiconlock |
Manufacturer: |
Weicon |
Color: |
Brown |
Size: |
50ml |
Final Strength: |
3 to 6 Hrs |
Height: |
19cm |
Care Instructions: |
WEICONLOCK can be stored in the unopened original container for at least 24 months at room temperature. Keep away from heat sources and direct sunlight. The air in the bottle/tube keeps WEICONLOCK liquid. |
Temperature Resistance: |
-60 to 150 Deg.C |
Brand Origin (not manufacture): |
Germany |
Delivery Time: |
2-7 Days |
Unit: |
Piece |
Related Products
Weicon
AED129.00
AED153.00
.
Surface pre-treatmentIn general, WEICONLOCK does not require special pre-treatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results will be achieved on...
Weicon
AED118.00
AED136.00
.
WEICONLOCK is ready for use and should be applied evenly direct from the bottle/tube with the dispensing tip (avoid direct contact of dispensing tip with metal). Apply WEICONLOCK in circular motions...
Weicon
AED118.00
AED138.00
.
Surface pre-treatment:In general, Weiconlock does not require special pre-treatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results will be achieved on...
Weicon
AED81.00
AED106.00
.
Pipe and flange sealing with PTFE, immediate sealing effect, DVGW-approval.In general, Weiconlock does not require special pretreatment as slightly oily surfaces (e.g. on as received parts) will be...
Weicon
AED86.00
AED112.00
.
Thread Sealing, DVGW approval, marking-free.In general, Weiconlock does not require special pretreatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results...
Weicon
AED81.00
AED109.00
.
Surface pre-treatment:In general, Weiconlock does not require special pre-treatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results will be achieved on...
Available on Request
Weicon
Surface pre-treatment:In general, Weiconlock does not require special pre-treatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results will be achieved on...
Weicon
AED60.00
AED76.00
.
Surface pre-treatmentIn general, WEICONLOCK does not require special pre-treatment as slightly oily surfaces (e.g. on as received parts) will be tolerated. However, best results will be achieved on...
Weicon
AED118.00
AED155.00
.
Pipe Sealing, extra strong Strength values based on M 10 screws, 8.8 grade, thickness of nut 0,8.d Static shear strength based on cylindrical parts of abt. Dia 13mm, tolerance (D-d) = 0.05mm, l/d = 0...